0,3+,9=0*,�)662??ţů?�?´??ĺD�yD5�y??
�ü
ADJUSTMENT
[16] Running Test Mode[17] Test pattern output mode
Testing continuous copy operation.Output test pattern.
Select ?3 Running test mode? in the AdjustmentSelect ?4 Test pattern output mode? in the Adjust-
mode menu Screen.ment mode menu Screen to display the Test pattern
This adjustment consists of the following items:output mode screen.
1 Intermittent copy modeCaution: Do not touch any mode that is not spe-
In this mode, the machine goes into the copycifically described.
ready state after completing a set number of
StepOperation
copy operations, waits 0.5 sec, and then repeats
the same operation.1Enter the 36 mode.
2 ADJUSTMENT[Adjustment mode menu Screen]
2 Paperless running mode
2
Press "4 Test pattern output mode".
In this mode, the machine goes into the copy
ready state after completing a set number of[Test pattern output mode Screen]
copy operations without performing paper detec-Use the numeric keys to enter the num-
3
tion or jam detection, waits 0.5 sec, and thenber of the test pattern to output and
repeats the same operation.press the SET key.
3 Paperless mode
4Press the COPY SCREEN key.
In this mode, the machine makes a set number of
[Copy Screen]
copies at approximately the same timing as for
5Select A3 size paper and press the
normal copy without performing paper detection
START button to output the test pattern.
or jam detection.
To output another test pattern, press the
4 Paperless endless mode
6C button while pressing the Utility button
In this mode, the machine makes copies atand repeat steps 3 to 5.
approximately the same timing as for normal
7Press the RETURN key to end.
copy without performing paper detection or jam
detection. The copy quantity is set to infinity auto-
matically.
5 Running mode
This mode consists of Paperless mode with
repetitive scanner scan and auto paper feed tray
change.
StepOperation
1Enter the 36 mode.
[Adjustment mode menu Screen]
2
Press "3 Running test mode".
[Running test mode menu Screen]
3
Press mode keys 1 to 5 .
[Copy Screen]
4
Press the START button.
Check the copy operation and then
5
press the STOP button to stop.
6Turn the SW2 (sub power) OFF.
2-72 |